Electric toothbrush long lifespan motor design is essential for brands focused on product reliability and reduced warranty risk. Motor durability directly determines vibration stability and product lifespan. Why Motor Lifespan Matters Electric toothbrush motors operate daily under continuous vibration and moisture exposure. Therefore, premature motor failure leads to negative reviews and increased after-sales costs. Moreover, long motor lifespan supports sustainability goals by extending product usage cycles. Motor Engineering for Extended Lifespan OEM manufacturers optimize bearing structures, shaft materials, and magnetic components to reduce friction and heat generation. In addition, motor sealing protects internal components from moisture intrusion, which is a common failure cause in oral care devices. Motor solutions integrated into electric toothbrush platforms can be reviewed here:👉 https://www.powsmart.com/sonic-toothbrush/ Testing and Validation Processes Long lifespan motors undergo endurance testing that simulates years of daily brushing cycles. Continuous operation tests identify early wear patterns. Furthermore, thermal testing ensures motors remain stable under extended usage, preventing performance degradation. Research institutions emphasize equipment durability as a key factor in consumer health device reliability.External reference: https://www.ncbi.nlm.nih.gov/ Impact on Brand Performance Motors with extended lifespan reduce return rates and enhance brand trust. For B2B buyers, this reliability translates into lower long-term operational costs. Additionally, stable…
Electric toothbrush housing material OEM development plays a critical role in product durability, user comfort, and long-term reliability. Housing materials must protect internal components while maintaining ergonomic appeal. Importance of Housing Material Selection The housing serves as both structural protection and a user interface. Therefore, material selection directly affects impact resistance, waterproof performance, and surface finish. Moreover, housing materials influence perceived product quality, especially in mid-to-high-end market segments. Common Housing Materials Used in OEM Production ABS and PC materials are widely used due to their balance of strength and moldability. For premium products, PC+ABS blends provide improved impact resistance. Additionally, soft-touch coatings or TPE inserts are applied to enhance grip and comfort. These materials must remain stable under moisture and repeated handling. OEM housing material configurations can be reviewed here:👉 https://www.powsmart.com/custom-oral-care/ Structural Engineering and Mold Design Material performance depends heavily on mold design. Wall thickness uniformity and internal rib structures improve strength without increasing weight. Furthermore, ultrasonic welding or adhesive bonding techniques are selected based on material compatibility to ensure waterproof sealing. According to manufacturing standards, material stability under temperature variation is essential for consumer electronics.External reference: https://www.iso.org/ Quality Testing and Validation Housing materials undergo drop tests, stress tests, and…
Electric toothbrush for e-commerce sellers has become a core product category as online channels continue to dominate consumer electronics sales. Unlike traditional retail brands, e-commerce sellers require faster response times, flexible order quantities, and consistent product performance to maintain platform ratings. E-commerce Sales Model Requirements Online sellers face intense competition and rapid listing cycles. Therefore, electric toothbrush products must be ready for fast launch and repeat replenishment. Moreover, e-commerce platforms emphasize user reviews and return rates. As a result, product stability and consistency directly affect long-term sales performance. Product Configuration for Online Channels E-commerce-oriented toothbrush models usually focus on balanced specifications rather than extreme performance. Stable vibration output, reliable batteries, and intuitive operation reduce negative feedback. In addition, packaging must be optimized for logistics. Compact box structures reduce shipping costs while protecting products during transport. You can explore electric toothbrush models suitable for online retail here:👉 https://www.powsmart.com/electric-toothbrush/ OEM Manufacturing and Supply Chain Efficiency OEM suppliers serving online sellers prioritize short lead times and stable BOM structures. This allows quick restocking during promotional periods. Furthermore, standardized components reduce production variability. This consistency helps sellers maintain uniform customer experience across batches. Industry research consistently shows that reliable daily-use oral care devices improve…
Electric toothbrush durability test supplier services help brands validate long-term performance before market launch. Durability testing ensures products survive real-world daily usage conditions. Importance of Durability Testing in Oral Care Devices Electric toothbrushes operate daily under moisture, vibration, and mechanical stress. Therefore, durability testing protects brands from costly recalls and warranty claims. Moreover, global distributors increasingly require documented reliability testing before onboarding suppliers. Core Durability Test Categories Suppliers conduct mechanical drop tests, vibration endurance tests, and waterproof lifecycle tests. Battery aging tests simulate years of charging cycles. In addition, button press tests validate switch lifespan, while shaft wear tests measure internal mechanical degradation. You can review quality-tested electric toothbrush models here:👉 https://www.powsmart.com/electric-toothbrush/ Accelerated Lifecycle Simulation Durability laboratories use accelerated testing methods to compress years of usage into weeks. High-temperature aging, vibration stress, and moisture cycling reveal early failure points. As a result, brands can optimize designs before mass production, reducing long-term operational risks. Compliance and Documentation Durability test suppliers provide detailed test reports aligned with international standards. These reports support CE, FCC, and other regional certifications. Industry organizations emphasize product safety and reliability in consumer health devices, reinforcing the necessity of durability validation.External reference: https://www.iso.org/ B2B Value for Brand Owners…
Sonic toothbrush frequency control OEM development focuses on delivering precise vibration parameters for targeted oral care performance. Frequency management directly affects cleaning efficiency, comfort perception, and battery consumption. Why Frequency Control Matters in Sonic Toothbrushes Frequency determines how effectively the toothbrush removes plaque while protecting enamel and soft tissues. Therefore, brands differentiate products through calibrated vibration profiles rather than raw power claims. Moreover, frequency stability improves user trust because inconsistent vibration signals poor engineering quality. Engineering Methods for Frequency Control OEM manufacturers use motor selection, PCB algorithms, and power management systems to maintain frequency stability. Closed-loop control systems monitor vibration feedback and adjust output in real time. In addition, frequency presets allow brands to offer multiple brushing modes such as daily clean, sensitive, and polish. This feature increases perceived product value. You can review frequency-controlled sonic toothbrush solutions here:👉 https://www.powsmart.com/sonic-toothbrush/ Manufacturing Precision and Testing Frequency calibration requires high manufacturing tolerance. Suppliers conduct frequency measurement tests using oscilloscopes and vibration sensors. Furthermore, endurance testing ensures that vibration frequency remains stable after thousands of operation cycles. This testing protects brand reputation in premium markets. Dental research platforms emphasize proper vibration control to optimize cleaning efficacy and minimize tissue irritation.External reference: https://www.ncbi.nlm.nih.gov/ OEM…
Electric toothbrush for daily use wholesale products represent the largest segment in the global oral care device market. Daily-use models must balance cleaning efficiency, comfort, and durability because consumers rely on them multiple times per day. Daily Use Electric Toothbrush Market Positioning Daily-use toothbrushes focus on routine oral hygiene rather than specialized whitening or gum therapy. Therefore, brands emphasize reliability, battery longevity, and gentle vibration profiles. Moreover, wholesale buyers prefer products that meet broad consumer expectations while maintaining manufacturing efficiency. As a result, daily-use models often become the core SKU for oral care brands. Key Engineering Considerations for Daily Use Manufacturers prioritize balanced vibration frequency, ergonomic handle design, and stable charging systems. These factors ensure consistent performance across different user demographics. In addition, waterproof structure design remains essential because daily-use devices face frequent exposure to water. Brands often require IPX7 or IPX8 ratings for retail compliance. You can explore daily-use electric toothbrush platforms here:👉 https://www.powsmart.com/electric-toothbrush/ Manufacturing and Quality Assurance Daily-use toothbrush production demands strict quality control. Suppliers test vibration stability, battery cycle life, and waterproof sealing during mass production. Furthermore, aging tests simulate long-term daily usage to detect motor degradation and battery performance decline. This approach reduces warranty claims and…
Introduction For brands exploring Private Label Oral Care, cost efficiency and scalability are key decision drivers. By partnering with an experienced manufacturer offering Volume Discount Available programs, businesses can accelerate market entry, optimize margins, and scale product lines with confidence. Lowering Unit Costs Through Economies of Scale One of the main advantages of Private Label Oral Care manufacturing is the ability to reduce per-unit costs as order volumes increase. With a structured Volume Discount Available strategy, brands can achieve competitive pricing while maintaining consistent product quality. Supporting Fast and Scalable Market Entry Private label solutions enable brands to launch quickly without heavy R&D investment. When combined with Volume Discount Available options, Private Label Oral Care becomes an attractive model for startups and established brands looking to expand product portfolios efficiently. Enhancing Profit Margins for Growing Brands As sales grow, volume-based pricing directly improves profitability. A transparent Volume Discount Available program allows Private Label Oral Care partners to plan pricing strategies more effectively and reinvest savings into marketing and brand development. Ensuring Consistent Quality Across Large Orders High-volume production does not mean compromised standards. Professional manufacturers apply strict quality control systems to ensure Private Label Oral products remain compliant, safe, and consistent—even…
Introduction For brands developing Orthodontic Oral Care Products, collaborating with dental professionals is a strategic path to market credibility and sustained growth. A well-structured Dental Clinic Partnership Program allows manufacturers to align product solutions with clinical expertise, patient trust, and real-world orthodontic care needs. Leveraging Professional Authority and Patient Trust Dental clinics are trusted sources of oral health guidance. By promoting Orthodontic Oral Care Products through a Dental Clinic Partnership Program, manufacturers benefit from professional endorsement that significantly influences patient purchasing decisions during orthodontic treatment. Reaching Patients at the Point of Clinical Need Orthodontic patients often struggle with plaque control, inflammation, and appliance-related hygiene challenges. Dental clinics provide direct access to patients at the exact moment when Orthodontic Oral Care Products are most relevant and necessary. Supporting Compliance and Long-term Treatment Outcomes Consistent use of appropriate oral care tools improves orthodontic outcomes. Through a Dental Clinic Partnership Program, clinics can educate patients on correct usage, increasing compliance and enhancing the perceived effectiveness of Orthodontic Oral Care. Enabling Product Trials and Professional Feedback Dental clinics offer valuable environments for real-world product evaluation. Manufacturers can gather clinical feedback, optimize formulations or designs, and refine Orthodontic Oral Care Products based on insights gained…
Introduction As digital ecosystems reshape oral care, an App-connected Toothbrush Developer is uniquely positioned to promote complementary consumables such as a Whitening Booster Solution. By combining connected hardware, user data, and software-driven engagement, manufacturers can create new value streams beyond the toothbrush itself. Leveraging App Ecosystems to Introduce Whitening Add-ons An app-connected platform provides direct access to end users. Through in-app notifications, usage tips, or personalized recommendations, an App-connected Toothbrush Developer can naturally introduce a Whitening Booster Solution as part of an enhanced oral care routine. Using Brushing Data to Enable Targeted Promotion Connected toothbrushes collect data on brushing frequency, pressure, and habits. This data allows an App-connected Toothbrush Developer to recommend a Whitening Booster Solution at the right moment—such as when users show consistent brushing behavior or whitening interest. Enhancing User Education and Correct Usage Whitening efficacy depends on proper application. An app can guide users on how and when to use a Whitening Booster Solution, ensuring safety and optimal results. This educational layer strengthens product credibility and reduces misuse concerns. Creating Bundled Value Propositions A Whitening Booster Solution can be bundled digitally with brushing modes, whitening programs, or subscription plans. For an App-connected Toothbrush Developer, this creates a…
Introduction For oral care brands adopting a recurring revenue strategy, a stable Brush Head Supply is the foundation of a successful Subscription Business Model. Unlike one-time device sales, subscription programs rely on consistent product availability, predictable quality, and timely fulfillment—making supply chain reliability a strategic priority for B2B manufacturers. Ensuring Consistent Product Availability for Recurring Orders A subscription model depends on scheduled, repeat deliveries. A dependable Brush Head Supply ensures that replacement heads are always available, allowing brands to meet subscription cycles without delays or stockouts that could disrupt the Subscription Business Model. Supporting Predictable Production Planning and Forecasting Reliable supply partners enable accurate demand forecasting based on subscriber volume. With a stable Brush Head Supply, manufacturers can align tooling, materials, and capacity planning to support scalable growth under a Subscription Business Model. Maintaining Consistent Quality Across Subscription Cycles Subscribers expect the same performance with every delivery. A controlled Brush Head Supply guarantees consistent materials, bristle profiles, and assembly standards—protecting brand trust and reducing churn in a Subscription Business Model. Enabling Cost Optimization and Long-term Pricing Stability Long-term supply agreements for brush heads help stabilize raw material and production costs. This cost predictability allows brands to price subscription tiers more…
Introduction In any professional Desktop Irrigator Design, water control and sealing performance directly affect safety, reliability, and user experience. A well-engineered Leak-proof Valve is not merely a supporting part—it is a core component that ensures stable pressure delivery, protects internal electronics, and upholds product quality standards in B2B manufacturing. Preventing Water Leakage and Electrical Risk Desktop irrigators integrate motors, PCBs, and power modules within a single enclosure. A high-performance Leak-proof Valve prevents unintended water ingress, safeguarding sensitive components and reducing the risk of electrical failure within the Desktop Irrigator Design. Maintaining Stable Water Pressure and Flow Control Inconsistent sealing can lead to pressure loss, dripping, or backflow. By using a reliable Leak-proof Valve, manufacturers ensure that the Desktop Irrigator Design delivers consistent water pressure, which is essential for effective oral irrigation performance. Enhancing User Experience and Product Perception Visible leaks quickly undermine user confidence. A precision-engineered Leak-proof Valve contributes to a clean, drip-free experience, reinforcing the perception of quality and professionalism in a Desktop Irrigator Design intended for long-term home use. Supporting Long-term Durability and Reduced Maintenance Repeated on/off cycles place mechanical stress on internal components. A durable Leak-proof Valve minimizes wear-related failures, extending the service life of the Desktop…
Introduction In professional clinical and salon environments, a Teeth Shade Guide is an essential companion to any Salon Whitening Device. Beyond simple color reference, it plays a critical role in treatment assessment, client communication, and service standardization. For B2B manufacturers and OEM/ODM partners, integrating a shade guide enhances both device credibility and professional usability. Establishing an Objective Baseline Before Treatment A Teeth Shade Guide allows practitioners to document the initial tooth color prior to using a Salon Whitening Device. This objective baseline ensures that treatment planning is consistent and measurable, reducing subjective judgment and setting clear expectations. Demonstrating Visible Results to Clients Post-treatment comparison using a Teeth Shade Guide helps clearly illustrate whitening effectiveness. When paired with a Salon Whitening Device, visual proof of shade improvement increases client satisfaction and reinforces the perceived value of professional whitening services. Supporting Professional Consultation and Trust Clients are more confident when results are explained using standardized tools. A Teeth Shade Guide enables salons to communicate outcomes in an industry-recognized format, strengthening trust in the Salon Whitening Device and the practitioner’s expertise. Standardizing Service Quality Across Locations For salon chains or clinics operating multiple locations, a Teeth Shade Guide helps maintain consistent evaluation standards.…
San Francisco, a hub of innovation and health-conscious consumers, presents a thriving market for oral care products, especially advanced sonic toothbrushes. For retailers, distributors, and businesses looking to source these products in bulk, finding a reliable, cost-effective supplier is key. This is where Powsmart stands out as your strategic partner. As a leading factory and manufacturer based in China, we supply the San Francisco Bay Area and beyond with premium sonic toothbrushes that rival top brands in performance, without the premium price tag. Why San Francisco Chooses Powsmart Sonic Toothbrushes (Made in China) It's crucial to clarify: Powsmart products are designed and manufactured in China, leveraging advanced production expertise and scale to deliver exceptional value. We are the factory and supplier behind brands serving markets like San Francisco, California. Our deep understanding of global quality standards allows us to produce sonic toothbrushes that meet the high demands of SF consumers. Our bulk sonic toothbrushes incorporate features that echo the advantages of high-end models: Superior Plaque Removal: Utilizing high-frequency sonic vibrations (often 31,000-40,000 strokes per minute), our brushes effectively disrupt plaque biofilm along the gumline and between teeth, promoting superior oral health. Multiple Cleaning Modes: Standard models include modes like Clean, Whitening, Sensitive, and Gum Care, catering to individual…
The adult smart toothbrush is reshaping the global oral-care industry as consumers increasingly adopt connected wellness devices. With intelligent sensors, app-guided routines, and personalized brushing feedback, smart toothbrushes deliver a significantly improved user experience. Therefore, retailers and OEM buyers view smart models as a high-potential category for both premium and mid-range markets. Moreover, adult smart toothbrushes appeal strongly to tech-savvy customers who value data, analytics, and improved brushing performance. As smart health ecosystems expand, these devices continue gaining popularity across global marketplaces. Why Smart Brushing Technology Matters for Retailers Smart toothbrushes monitor brushing pressure, coverage, and duration, offering real-time guidance that improves oral-care habits. Although manual and basic electric brushes provide convenience, connected models deliver measurable progress. Consequently, retailers use smart devices to differentiate their catalog and attract higher-value customers. The Oral Health Foundation highlights the importance of brushing duration and proper cleaning angles for better hygiene outcomes (https://www.dentalhealth.org/). Smart toothbrushes support these educational goals effectively. OEM Custom Features for Adult Smart Toothbrushes Smart toothbrushes can be equipped with Bluetooth connectivity, multi-mode settings, LED feedback indicators, and position-tracking sensors. Additionally, brands can request custom mobile-app integration or private-label user interface design to strengthen brand identity. To explore customizable smart models,…
The waterproof IPX7 toothbrush has become an essential product category for distributors seeking reliable and durable oral-care devices. Because consumers increasingly use electric toothbrushes in the shower or rinse them frequently under running water, high-level waterproof protection is now a standard expectation. Consequently, IPX7-rated toothbrushes offer a major competitive advantage for brands that prioritize durability and long-term user satisfaction. In addition, IPX7 protection ensures the device maintains consistent performance even in humid environments, making it ideal for travelers, athletes, and customers living in areas with high moisture levels. Why IPX7 Waterproofing Matters for Retail Buyers IPX7 certification indicates that a device can withstand immersion in water up to one meter for 30 minutes. Although consumers may not fully understand the numerical rating, they value reliability and product safety. Therefore, offering IPX7 models allows retailers to confidently promote durability and prevent common water-damage complaints. Industry experts such as the Oral Health Foundation highlight the importance of safe hygiene practices, including properly rinsing toothbrushes to maintain cleanliness (https://www.dentalhealth.org/). IPX7 protection supports these habits effectively. OEM Design Features Supporting Waterproof Performance Waterproof toothbrushes rely on sealed internal structures, reinforced casing materials, and moisture-resistant charging systems. Furthermore, OEM buyers can choose magnetic charging, USB-seal…
The micro-vibration toothbrush is becoming a top choice for international importers seeking a gentle yet effective cleaning technology that appeals to modern consumers. With increasing awareness of gum health, micro-vibration systems deliver a smoother brushing experience that reduces irritation while still providing strong plaque removal. As a result, distributors are adding these devices to premium and sensitive-care product lines to meet growing global demand. Furthermore, micro-vibration technology enables brands to target customers who avoid high-intensity brushing but still want advanced sonic performance. This balanced combination of comfort and efficiency makes micro-vibration toothbrushes ideal for a wide range of user groups, including professionals, seniors, and first-time electric toothbrush users. Benefits of Micro-Vibration Technology for Retail Buyers Retailers increasingly choose low-intensity sonic devices because they support gum comfort without compromising cleaning capability. Although high-power models offer strong performance, many customers prefer a softer alternative. Therefore, micro-vibration technology helps brands cater to sensitive-gum users—one of the fastest-growing oral-care segments. Additionally, the Oral Health Foundation reports that gentle brushing methods are essential for preventing gum recession and enamel wear (https://www.dentalhealth.org/). This strengthens the marketing value of micro-vibration devices across wellness-focused channels. OEM Custom Options for Micro-Vibration Sonic Designs Micro-vibration toothbrushes can be customized with…
The premium electric toothbrush has become a top choice for global distributors seeking to enter high-end oral-care markets. Because consumers increasingly associate oral hygiene with overall wellness, premium toothbrushes offer advanced features that elevate brushing comfort, efficiency, and long-term results. As a result, retailers use premium models to strengthen their brand identity and differentiate their product catalogs. In addition, premium toothbrushes often appeal to lifestyle-oriented customers who prioritize durability, aesthetic design, and advanced brushing technology. What Defines a Premium Sonic Toothbrush? Premium toothbrushes combine powerful sonic motors, advanced brushing modes, elegant materials, and long-lasting performance. Although basic electric models offer good cleaning results, premium devices deliver smoother motion, smarter feedback, and more refined user experiences. According to the American Dental Association (ADA) (https://www.ada.org/), consistent brushing habits and proper cleaning motion significantly influence oral health outcomes. Premium toothbrushes support these habits with enhanced features and ergonomic comfort. OEM Customization Options for High-End Toothbrush Designs OEM buyers often request customized finishes, including matte coatings, metallic textures, and soft-touch surfaces. Furthermore, premium toothbrushes can integrate smart features such as pressure alerts, multi-mode operation, and wireless fast charging. To explore premium-model structures and customization capabilities, visit:https://powsmart.com/electric-toothbrush Advanced User Experience Through Enhanced Sonic Technology Premium…
The replaceable head sonic toothbrush is rapidly becoming a preferred choice for international distributors focusing on sustainability, value, and long-term usability. Because consumers increasingly seek eco-friendly and cost-effective products, replaceable-head systems provide clear advantages over disposable toothbrushes or single-piece electric designs. Moreover, offering replaceable brush heads strengthens brand loyalty, as customers return for ongoing replacements. Consequently, OEM suppliers benefit from repeat sales and expanded product ecosystems. Why Replaceable Brush Heads Benefit Retail Buyers Replaceable-head systems reduce plastic waste, lower long-term customer costs, and extend the lifecycle of each device. Although standard electric toothbrushes offer convenience, replaceable designs create a more complete oral-care ecosystem. Therefore, retailers can market these products as both environmentally conscious and practical for daily use. The Oral Health Foundation recommends replacing brush heads every three months to maintain effective plaque removal (https://www.dentalhealth.org/). This recommendation directly supports the recurring sale opportunity for OEM distributors. OEM Customization Options for Replaceable Sonic Designs OEM brands can request various brush-head types, including soft, sensitive, polishing, and deep-clean styles. Additionally, replaceable-head toothbrushes offer excellent branding flexibility through custom colors, materials, and packaging options. Browse available replaceable-head structures at:https://powsmart.com/electric-toothbrush Supporting Sustainability and Long-Term Product Value Replaceable-head systems align with global sustainability trends. Because…
The quiet operation electric toothbrush has become increasingly attractive to global distributors who want to deliver silent yet powerful oral-care devices. As consumers continue to seek more comfortable brushing experiences, low-noise performance has emerged as a valuable selling feature. Because noise sensitivity affects a broad range of users—including parents, travelers, and professionals—retailers find that quiet-operation designs achieve significantly higher satisfaction rates. Moreover, modern OEM buyers recognize that quieter toothbrushes enhance product positioning in mid-to-high-end categories. Therefore, brands targeting premium customers often prioritize devices engineered with reduced vibration sound and balanced motor technology. Why Low-Noise Sonic Technology Matters for Retail Buyers Quiet performance is more than a comfort feature; it significantly improves user experience. Although standard sonic motors offer powerful cleaning, unnecessary noise can reduce perceived quality. Consequently, low-noise engineering helps brands differentiate their products in competitive marketplaces. Additionally, consumers increasingly use electric toothbrushes during late-night routines or shared living environments. Since quiet devices minimize disturbances, they appeal to a wider demographic. Industry organizations such as the Oral Health Foundation emphasize user comfort as an important component of maintaining long-term brushing habits (https://www.dentalhealth.org/). OEM Customization Options for Silent Sonic Toothbrushes To meet diverse market needs, low-noise toothbrushes can be customized with…
As oral-care devices become more advanced, manufacturers increasingly rely on a custom Brush Handle Mold to ensure reliable integration of a Calcified Deposit Remover mechanism. Achieving stable performance for such precision functions requires careful structural engineering, ergonomic shaping, and process-driven mold optimization from the earliest design stage. Structural Reinforcement Ensures Mechanical Stability A Calcified Deposit Remover often requires higher vibration force or rotary torque compared with standard brushing tools. A custom Brush Handle Mold allows engineers to thicken load-bearing zones and reinforce internal ribs, preventing flex or deformation during high-intensity operation. Dedicated Internal Cavities Enable Mechanism Integration Custom molding makes it possible to design internal channels, motor compartments, and transmission mounts that securely house the remover module. These precision pockets ensure smooth mechanical alignment, efficient power delivery, and consistent deposit-removal performance. Optimized Weight Distribution Improves User Control Because a Calcified Deposit Remover requires precise handling, the handle must feel balanced. Tailored mold geometry lets manufacturers shift mass toward the grip zone, improving maneuverability and reducing user fatigue in plaque-dense or hard-to-reach areas. Material Selection Enhances Vibration Dampening Through a custom Brush Handle Mold, OEMs can choose polymers with specific damping properties. Materials can be adjusted to absorb unwanted vibration while…
